High speed 5GHz network - 11n

This article needs more data and better formating

Here are the results from a quick test using two WAR-1a systems. Note that we performed the test through the systems, between two large Intel i7 desktops. Connection Tracking on both WAR-1a systems has been disabled (important to achieve full throughput), and the network is routed.

WLM200N5-26 2x2 HT40, 5Ghz,

Connection Tracking disabled, routed, v3 v1.5.16.2 PC (iperf client) ----x---- WAR-1a (Client) -- ( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server)

[SUM] 0.0-10.2 sec 108 MBytes 88.4 Mbits/sec

---

WLM200N5-26 2x2 HT20, 5Ghz,

Connection Tracking disabled, routed, v3 v1.5.16.2 PC (iperf client) ----x---- WAR-1a (Client) --( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server)

[SUM] 0.0-10.2 sec 106 MBytes 87.3 Mbits/sec

---

The following are between an Alix.3C (client), and a prototype AR7161 600MHz w/ GigE as the AP

both running v3 v1.5.16.2 Alix.3C (Client, iperf client) --( ~~25 ft~~ )-- Prototype(AP) ----GigE---- PC (iperf server) The throughput test was taken from the Alix console to circumvent the 10/100 Ethernet. All tests were done with Connection tracking being enabled on the AP, except for the last 2x2 HT40 test which has it disabled.

• 1x1 11A HT20

[SUM] 0.0-10.1 sec 60.3 MBytes 50.2 Mbits/sec

• 2x2 11A HT20

[SUM] 0.0-10.1 sec 115 MBytes 96.2 Mbits/sec

• 1x1 11A HT40

[SUM] 0.0-10.1 sec 134 MBytes 112 Mbits/sec

• 2x2 11A HT40

[SUM] 0.0-10.0 sec 208 MBytes 175 Mbits/sec

---

x4000 to x4000

[ 11] 0.0-10.0 sec 28.4 MBytes 23.8 Mbits/sec

laptop to pc on each side of exact same link

[ 3] 0.0-10.0 sec 21.9 MBytes 18.3 Mbits/sec and [ 4] 0.0-10.0 sec 31.7 MBytes 26.6 Mbits/sec