Difference between revisions of "High speed 5GHz network - 11n"
Jump to navigation
Jump to search
(Mayor formating) |
|||
| Line 1: | Line 1: | ||
Here are the results from a quick test using two WAR-1a systems. Note that we performed the test through the systems, between two large Intel i7 desktops. Connection Tracking on both WAR-1a systems has been disabled (important to achieve full throughput), and the network is routed. | Here are the results from a quick test using two WAR-1a systems. Note that we performed the test through the systems, between two large Intel i7 desktops. Connection Tracking on both WAR-1a systems has been disabled (important to achieve full throughput), and the network is routed. | ||
WLM200N5-26 2x2 HT40, 5Ghz, Connection Tracking disabled, routed, v3 v1.5.16.2 | == WLM200N5-26 2x2 HT40, 5Ghz, == | ||
Connection Tracking disabled, routed, v3 v1.5.16.2 | |||
PC (iperf client) ----x---- WAR-1a (Client) -- ( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server) | PC (iperf client) ----x---- WAR-1a (Client) -- ( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server) | ||
| Line 7: | Line 8: | ||
---- | ---- | ||
WLM200N5-26 2x2 HT20, 5Ghz, Connection Tracking disabled, routed, v3 v1.5.16.2 | == WLM200N5-26 2x2 HT20, 5Ghz, == | ||
Connection Tracking disabled, routed, v3 v1.5.16.2 | |||
PC (iperf client) ----x---- WAR-1a (Client) --( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server) | PC (iperf client) ----x---- WAR-1a (Client) --( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server) | ||
| Line 13: | Line 15: | ||
---- | ---- | ||
The following are between an Alix.3C (client), and a prototype AR7161 600MHz w/ GigE as the AP | == The following are between an Alix.3C (client), and a prototype AR7161 600MHz w/ GigE as the AP == | ||
both running v3 v1.5.16.2 | |||
Alix.3C (Client, iperf client) --( ~~25 ft~~ )-- Prototype(AP) ----GigE---- PC (iperf server) | Alix.3C (Client, iperf client) --( ~~25 ft~~ )-- Prototype(AP) ----GigE---- PC (iperf server) | ||
The throughput test was taken from the Alix console to circumvent the 10/100 Ethernet. | The throughput test was taken from the Alix console to circumvent the 10/100 Ethernet. | ||
All tests were done with Connection tracking being enabled on the AP, except for the last 2x2 HT40 test which has it disabled. | All tests were done with Connection tracking being enabled on the AP, except for the last 2x2 HT40 test which has it disabled. | ||
1x1 11A HT20 | * 1x1 11A HT20 | ||
[SUM] 0.0-10.1 sec 60.3 MBytes 50.2 Mbits/sec | [SUM] 0.0-10.1 sec 60.3 MBytes 50.2 Mbits/sec | ||
* 2x2 11A HT20 | |||
2x2 11A HT20 | |||
[SUM] 0.0-10.1 sec 115 MBytes 96.2 Mbits/sec | [SUM] 0.0-10.1 sec 115 MBytes 96.2 Mbits/sec | ||
* 1x1 11A HT40 | |||
1x1 11A HT40 | |||
[SUM] 0.0-10.1 sec 134 MBytes 112 Mbits/sec | [SUM] 0.0-10.1 sec 134 MBytes 112 Mbits/sec | ||
* 2x2 11A HT40 | |||
2x2 11A HT40 | |||
[SUM] 0.0-10.0 sec 208 MBytes 175 Mbits/sec | [SUM] 0.0-10.0 sec 208 MBytes 175 Mbits/sec | ||
---- | ---- | ||
x4000 to x4000 | == x4000 to x4000 == | ||
[ 11] 0.0-10.0 sec 28.4 MBytes 23.8 Mbits/sec | [ 11] 0.0-10.0 sec 28.4 MBytes 23.8 Mbits/sec | ||
Revision as of 19:50, 24 March 2011
Here are the results from a quick test using two WAR-1a systems. Note that we performed the test through the systems, between two large Intel i7 desktops. Connection Tracking on both WAR-1a systems has been disabled (important to achieve full throughput), and the network is routed.
WLM200N5-26 2x2 HT40, 5Ghz,
Connection Tracking disabled, routed, v3 v1.5.16.2 PC (iperf client) ----x---- WAR-1a (Client) -- ( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server)
[SUM] 0.0-10.2 sec 108 MBytes 88.4 Mbits/sec
WLM200N5-26 2x2 HT20, 5Ghz,
Connection Tracking disabled, routed, v3 v1.5.16.2 PC (iperf client) ----x---- WAR-1a (Client) --( ~~25 ft~~ )-- WAR-1a(AP) ----x---- PC (iperf server)
[SUM] 0.0-10.2 sec 106 MBytes 87.3 Mbits/sec
The following are between an Alix.3C (client), and a prototype AR7161 600MHz w/ GigE as the AP
both running v3 v1.5.16.2 Alix.3C (Client, iperf client) --( ~~25 ft~~ )-- Prototype(AP) ----GigE---- PC (iperf server) The throughput test was taken from the Alix console to circumvent the 10/100 Ethernet. All tests were done with Connection tracking being enabled on the AP, except for the last 2x2 HT40 test which has it disabled.
- 1x1 11A HT20
[SUM] 0.0-10.1 sec 60.3 MBytes 50.2 Mbits/sec
- 2x2 11A HT20
[SUM] 0.0-10.1 sec 115 MBytes 96.2 Mbits/sec
- 1x1 11A HT40
[SUM] 0.0-10.1 sec 134 MBytes 112 Mbits/sec
- 2x2 11A HT40
[SUM] 0.0-10.0 sec 208 MBytes 175 Mbits/sec
x4000 to x4000
[ 11] 0.0-10.0 sec 28.4 MBytes 23.8 Mbits/sec
laptop to pc on each side of exact same link
[ 3] 0.0-10.0 sec 21.9 MBytes 18.3 Mbits/sec and [ 4] 0.0-10.0 sec 31.7 MBytes 26.6 Mbits/sec