V3 Upgrade Procedure

From StarOS Community Wiki
Revision as of 17:33, 30 November 2006 by Simcor23 (talk | contribs)
Jump to navigation Jump to search

Upgrade Star-V3 X-SCALE WAR




1. Download current release from [www.staros.com]

2. Extract starutil-windows-1.14.zip into c:\windows

3. Type c:\starutil 192.168.1.1 1234 -f vncOs-1.x.x-xxxx.pkg


Replace the IP Password and Firmware version as needed.


4.Log into your Star-V3 system via putty

5.In the menu options goto system->upgrade firmware and follow prompts

6. When the flash is complete reboot and away you go.


Note: If your ssh session is lost during upgrade do not panic as it will complete normally.


DO NOT:Disconnect or Interrupt power Star-V3 system during upgrade procedure, as it will become damaged and will need RMA service to repair it.