Difference between revisions of "V3 Upgrade Procedure"

From StarOS Community Wiki
Jump to navigation Jump to search
Line 1: Line 1:
== Upgrade Star-V3 X-SCALE WAR ==
== Upgrade StarV3 Over the Network ==
 
* This example is for Windows users
----
# Download current release from [http://www.star-os.com star-os.com]
 
# Extract the appropriate firmware .pkg file for your platform and the contents of starutil-windows-1.14.zip to a directory of your choosing (Using c:\staros for our example)
 
# Open a command prompt (Start --> Run, "cmd") and change to the directory you extracted your files to (ex. "cd \staros")
 
# Upload the new firmware image: Type starutil 192.168.1.1 1234 -f vncOs-1.x.x-xxxx.pkg (replace the IP address, password and firmware file name as needed)
 
# Log in to your StarV3 system via ssh
1. Download current release from [http://www.star-os.com www.star-os.com]
# In the menu options go to system->upgrade firmware and follow prompts
 
# When the flash is complete reboot and away you go
2. Extract starutil-windows-1.14.zip into c:\windows
 
3. Type starutil 192.168.1.1 1234 -f vncOs-1.x.x-xxxx.pkg
 
 
Replace the IP Password and Firmware version as needed.
 
 
4. Log into your Star-V3 system via putty
 
5. In the menu options goto system->upgrade firmware and follow prompts
 
6. When the flash is complete reboot and away you go.




Line 26: Line 13:




'''DO NOT:'''Disconnect or Interrupt power Star-V3 system during upgrade procedure, as it will become damaged and will need RMA service to repair it.
'''DO NOT:''' Disconnect or Interrupt power StarV3 system during upgrade procedure, as it will become damaged and will need RMA service to repair it.
 
 
{{stub}}

Revision as of 03:43, 5 December 2006

Upgrade StarV3 Over the Network

  • This example is for Windows users
  1. Download current release from star-os.com
  2. Extract the appropriate firmware .pkg file for your platform and the contents of starutil-windows-1.14.zip to a directory of your choosing (Using c:\staros for our example)
  3. Open a command prompt (Start --> Run, "cmd") and change to the directory you extracted your files to (ex. "cd \staros")
  4. Upload the new firmware image: Type starutil 192.168.1.1 1234 -f vncOs-1.x.x-xxxx.pkg (replace the IP address, password and firmware file name as needed)
  5. Log in to your StarV3 system via ssh
  6. In the menu options go to system->upgrade firmware and follow prompts
  7. When the flash is complete reboot and away you go


Note: If your ssh session is lost during upgrade do not panic as it will complete normally.


DO NOT: Disconnect or Interrupt power StarV3 system during upgrade procedure, as it will become damaged and will need RMA service to repair it.

Retrieved from "http://staros.tog.net/index.php?title=V3_Upgrade_Procedure&oldid=1588"