Upgrading to V3
Jump to navigation
Jump to search
Upgrading StarOS v2 to StarV3
- Read the StarV3 Differences article to determine if all the features you require from StarOS v2 are still supported under StarV3 before deciding to upgrade to StarV3.
- From any StarOS v2 build, upgrade to the appropriate StarOS v2 cross-over release. You can find these at ftp://tog.net/staros/. If you are using the StarOS v2 Server Edition you will have to use to the "strr" router edition as StarV3 currently has no comparable server edition.
- Reboot to boot the new StarOS v2 cross-over build.
- Disable any WEP/WPA you are using on any of your wireless interfaces, activate changes.
- Install the StarV3 license you got from license-keys.com.
- Upload an appropriate StarV3 release for your platform using Starutil, then use system --> upgrade firmware to perform the firmware upgrade.
- Use "file" --> "reboot machine" and choose yes to save settings, then be patient and give it a couple minutes to boot back up. It will be generating a new ssh key.
- Login to your newly-updated StarV3 system and re-enable any WEP, ACL (and soon WPA) you wanted to use.