RIP
Jump to navigation
Jump to search
ENABLE RIP & CONFIGURE
That is the real fast way to get RIP running and works in most cases.
From the main screen:-
Select "Routing"
Select "dynamic routing"
Put an "X" in the box "Enable Rip v1/2"
Select "Configure"
User Access Verification
Password: 1234 ripd> enable ripd# configure terminal ripd(config)# router rip ripd(config-router)# network 0.0.0.0/0 ripd(config-router)# write Configuration saved to /etc/config/routing/ripd.conf ripd(config-router)# exit ripd(config)# exit ripd# exit
If you do not want a particular device or subnet announced then you have to add it like this:-
ripd(config-router)# network eth0
Please note that network 0.0.0.0/0 should already be set as it is the default.