Getting Started With V3

From StarOS Community Wiki
Revision as of 17:44, 9 December 2006 by Tog (talk | contribs)
Jump to navigation Jump to search

Logging into your new StarV3 system for the first time

The defaults are: 192.168.1.1 on ether1 192.168.2.1 on ether2 192.168.3.1 on wpci1 (the first atheros card)

Additionally, wpci1 has a default 802.11b/g access point enabled so you can associate to it with a wireless client (a laptop's wifi will work) and communicate with it on 192.168.3.1.

The default login is admin, the default password is 1234.

You must use an ssh client to login, PuTTY is recommended for Windows.

Quad WAR layout

Outside corner ethernet connector is ether1, power over ethernet input goes here

Inside ethernet connector is ether2

wpci1 - Top, closest to serial port, wpci1

wpci2 - Top, closest to ethernet ports

wpci3 - Bottom, closest to serial port

wpci4 - Bottom, closest to ethernet ports, wpci4